Skip to product information
1 of 7

Outdoor CS CP-AK105/74 Water Bomb Modification Tactical protect the wood core 3D Printing Appearance Modified Accessories KJ27

Outdoor CS CP-AK105/74 Water Bomb Modification Tactical protect the wood core 3D Printing Appearance Modified Accessories KJ27

Regular price $20.02
Regular price $26.00 Sale price $20.02
Sale Sold out
Shipping calculated at checkout.
color
In particular:
 
1. Non-destructive replacement of the original assembly installation;
 
2. Tactically, the internal size of the timber protection is 98 mm * 18 mm * 20 mm, and the space is limited, so the batteries can not be installed. It is suggested that the matching tactical support core be used.
 
3. Tactical core support for tail power supply, battery bunker size: 164mm*22mm*19mm;
 
4. After changing the tactical support core, the tail support can not be folded.
 
5. The support core is standard size. It can be compatible with army support, Navy support, CTR support and MFT support. Due to the variety of tail support manufacturers and tail support, there may be tolerances. If installation is difficult, please grind the support core slightly first.

Wood Protection Installation Course:

1.Pull out the pin and remove the original protect the wood

2.Install the battery wire through the guard wood as shown below.

3.Push the protect the wood forward and put your hand on it

4.Insertion pin installation is complete

 

Tactical Core Installation Course:

1.Remove the original tailstock and retain the original fixing screw


2.The original fixing screw is screwed on the tactical support core in advance, and the inner screw of the support core is even enough.

3.Insert the supporting core and tighten the fixed screw on both sides appropriately.

Installation effect

View full details